Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

12V DC Fuse for LED Strip (3A, 5A OR 10A)



In stock

12V DC Fuse for LED Strip (3A, 5A OR 10A)

Safely install LED strips in your RV, boat, car or any other 12 Volt circuit, thanks this 12V Automotive fuse holder. This spill proof fuse holder comes with either a 3A, 5A or 10A fuse, depending on your needs, all you need to do is select the required power in the pull down menu. In order to know what fuse you will need, simply match the fuse rating with the power of the power supply normally used for the same set up. Please note that if a product, like the Epistar Cool White 5 Meter 5050 LED Strip, normally requires a 6A power supply, a 5A fuse should be used.

This fuse holder comes with a looped wire and is quite easy to install: simply cut the wire in the middle so you end up with about 4 inches of wire on each side of the fuse. Next step requires that you skin each side of the wire in order to install the fuse in line on your positive 12 volts wire. We always recommend that the fuse be installed as close to the battery or power source as possible.

As always, LED Strip Canada's experts are here to help should you have questions regarding your project. Drop us a line or call if you require assistance!

No FAQ found, submit a question!