Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

RF Multi Zone 1 to 5 meter Single Color 5050 Epistar LED Strips Kit

RF Multi Zone 1 to 5 meter Single Color 5050 Epistar LED Strips Kit

CODE: MZSC1MKIT

$53.03

In stock

RF Multi Zone 1 to 5 meter Single Color 5050 Epistar LED Strips Kit

If you’re looking for the ultimate product to light up many different areas and control them all from a single remote, you’ve clicked on the right link! The RF Multi Zone 1 to 5 meter Single Color 5050 Epistar LED Strips Kit from LED Strip Canada is a simple, easy to install product that allows you to light up smaller parts of your home or office without having to alter your strips and to control your whole lighting setup from one place.

This kit uses the Epistar 1 Meter 5050 LED Strips which come with a connector on both ends so you don’t need to cut the strip and attach extensions to go over your oven, sink or any object you need to bypass (note that you still could if you wanted to). All you have to do is plug DC extensions into the connectors and you’re good to go. It makes the whole process so much easier!

Available in warm white (3200K) or cool white (6000K).

One simple remote to control everything.
The Multi Zone RF remote operates on 2.4 GHz frequency, giving it a range of at least 20 meters and the RF signal doesn’t require you to point at the controller. The center touchpad gives you control over the brightness of your lighting (up-down). You can also assign an unlimited amount of single color strips to whichever one of the 4 available zones

What you can have with your kit:
In order to keep your kit working properly and your lighting as even as possible, we suggest you don’t put more than 5 x 1m strips + 5 x 1m DC extensions on the same circuit. This said, you can make as many circuits as you want and as long as they all have a multi zone controller, you can control them all with your multi zone remote.

Those items can be synced and controlled together, within the same zone. So if you set 2 different 5 meter bundles on Zone 1, for example, and then turn zone 1 on with the remote, all your LED Strips will turn on.

Want the light to turn on automatically when someone's around? Use the PIR Motion Detector with your LED Strip bundle, it's a super effective add-on piece!

Note that if you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as double sided tape.

The 4 Zone set up is just awesome and so convenient!
A few examples:

  • •  Control the lighting in your kitchen on Zone 1, your bedroom on Zone 2, your living room on Zone 3 and your recreation room on Zone 4.
    •  Divide a room in two zones and control one side with Zone 1 and the other side using Zone 2. 
    •  Alternatively, you could set up the whole house on a single zone and have all your strips turn on and off in sync... that’s how powerful and versatile this kit is!

Adding on to a Zone is easy!
For a new product or a product that has never been linked before:

  1. Disconnect the power supply from the controller.
  2. Turn the light back on and within 3 seconds; press the ON (│) button of the zone you want to assign (1 to 4) on the remote control. 
  3. The light will slowly flash 3 times to indicate that it was successfully linked.

You can repeat this procedure for each light product you want to add to your Zone.

Change a light from one zone to another.
If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.

  1. Identify which zone the light is currently assigned to.
  2. Disconnect the power supply. 
  3. Power the light back on and within 3 seconds; press the ON button of the previously assigned zone 5 times quickly.
  4. You can then proceed and program your light according to the add-on procedure outlined above.

For extensive instructions on how to install your Multi-Zone setup, VISIT THIS PAGE.
 

Your power sources.
Please note that although you can sync and control an unlimited amount of LED Strips in each Zone, make sure that you have a power outlet available for each 5m of these 1m 5050 LED Strips.  The experts at LEDStrip.ca will make sure to include the right power supply for the specific kits you order.

As always, our team of experts is available should you have any questions or require assistance putting your project together.

 
Loading...