Easter holiday. Friday march 29th, the store will be closed. Monday April 1st, the store will be open. 

24V IP67 5 to 20m 300 RGBW LED Strip Kit with Outdoor Driver

IP67RGBW24VK
$194.95
In stock
IP67RGBW24VK
Delivery
Shipping time and rates:
Payment options
Our advantages

24V IP67 5 to 20m 300 RGBW LED Strip Kit with Outdoor Driver

A new IP67 Strip from LED Montreal which includes RGB + White all on one strip - The 24V IP67 5 to 20m 300 RGBW LED Strip Kit with Outdoor Driver

Want the best, most colorful outdoor RGB LED lighting setup with a true white that you can use on your patio, gazebo, RV, trailer, cottage or anywhere outside? The 24V IP67 5 to 20m 300 5050 RGBW LED Strip Kit with Outdoor Driver from LED Montreal is what you need in order to impress all your neighbours! The W in RGBW means the RGB strip has an extra chip that is actually white.  With the RGB strip, when all LEDS are at their maximum brightness, the light perceived “seems” white.  While a RGB strip can deliver something that is close to white, a white LED chip gives you a true white.

What does IP 67 mean in the 24V IP67 5 to 20m 300 RGBW LED Strip Kit with Outdoor Driver?

IP stands for the International Protection marking, which is an IEC (International Electrotechnical Commission) standard. The first digit (6) stands for its resistance to dust and general dirt and sand. The second digit (7) provides certification for water resistance. IP 67 means that the strip is protected from total dust ingress, and splashing of water in all directions. Generally speaking, your strip is perfect for outdoors use through all sorts of weather.

The 24V Outdoor Driver

The included weatherproof Outdoor driver lets you hardwire your strip kit to your 120V power source and install it outside. The driver features an output wire of 14 gauge, allowing you to use longer extensions between your driver and your controller (up to 20 meters with 14 gauge wire), giving more flexibility on where to get your power from. With its robust cover and waterproof connections and cables, it is your best option to power the Super Bright RGBW iP67 LED Strip kit that you want to install outdoors.

The kit comes with our high end Radio Frequency (RF) Multi Zone RGBW controller, that doesn't require you to point at the controller with the remote for it to work properly. It is very simple to install and it gives you the possibility of controlling your RGBW LED Strip from a distance up to 30 meters. To sufficiently protect your controller, we suggest using a Weatherproof Project Box.

The drop down will allow you to pick your preferred length of RGBW LED strip to perfectly match your needs!
About the Outdoor driver: This power supply is rated iP65 or better (protected from total dust ingress and low pressure water jets from any direction), which means it is water resistant and safe to put outside. Keep in mind that the connections are not water resistant and need to be protected. The 24V power supplies provide constant 24V current and feature two distinct ports for input and output: the 120V AC input has 3 wire connections: one for the live wire, one for the neutral wire and one for the ground. The 24V DC output features 2 connections: one positive and one negative, provided with 14 gauge wires. We will provide you for the accurate power supply for the kit you have chosen. Always install your driver vertically.

Compliant with worldwide safety regulations for lighting, our hard wired power supplies have been the electrician’s choice for years!

This single output power supply has integrated protection from short circuits, over current and over voltage as well as over temperature. All circuitry of the power supply is concealed inside a fully isolated aluminum case that is cooled by free air convection.

Important Note: The 24V power supplies are not compatible with AC dimmers. You will, however be able to dim your RGBW Strip with the provided remote control.

About the IP67 RGBW Strip Kits:

  • Includes IP67 RGBW Strips with 60 - 5050 LEDS per meter
    The Strip can be cut at every 6 LEDs to better suit your project
    Each Strip has a length of 5 meters (300 LEDs total)
    If you order a 10 meter kit, you will receive 2 x 5m Strips

    You can connect a maximum of 2 strips in series. If you plan on getting a kit of 20 meters, you need to connect your two series in parallel from the controller.

    Note that only the LED strip is waterproof, the connectors at both ends of the strip are not waterproof and must not be in contact with water or moisture. You can use extra silicon and heat shrink tube to make your setup safer.

    The IP67 strips are adhesive thanks to 3M double-sided adhesive tape. Additional option when looking for a sharp and subtle way to hold your IP67 LED strips; the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution.

 

ABOUT THE DRIVER INSTALLATION: Since the Outdoor Driver has to be hardwired into your existing 110-120V power, it requires to be installed by a qualified professional.

RGBW 300 Strip Specifications

  • iP67 LED Strip
    For indoor and outdoor use
    5M roll, 60LED/m. 300 LED total per roll
    Can be cut: Every 6 LED (10 cm)
    Required Power: 14.4W/m at 24V max
    LED Type: 5050

Given that this Strip offers 4 colors, it features 5 connectors unlike the Standard RGB Strip that normally features 4 connectors. This being said, solder less connectors are not available for this product.

 

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project