AC 110V - Set of 100 Triple 2835 Epistar LED Modules ( 1.5w per Module )

AC 110V - Set of 100 Triple 2835 Epistar LED Modules ( 1.5w / Module )

We invite you to consult the technical details of the 120V LED modules at the bottom of this page for complete information on this product.

The 110V LED Epistar 2835 modules with 3 LEDs from LED Montreal allow you to backlight your billboard or make a light table quickly and easily. Say goodbye to transformers which are sometimes difficult to conceal and which limit you to 50 modules per circuit! The 110V LED modules plug directly into your 110V circuit using a standard junction box and you can power up to 100 modules in series without any loss of brightness.

Available in cool white (6000-7000K) or warm white (3000-3500K), they are self-adhesive and even have a screw holder for increased installation solidity. Offering a brightness of 150 lumens per module of 3 LEDs, these modules are cURus certified as a component for Canada and the United States. The 2835 LED modules can be used indoors or outdoors.

These modules are meant to be used inside a weatherproof enclosure - do not directly expose LED modules to the elements

Max. number of modules in one row: 100pcs

TECHNICAL SHEET(pdf)

Technical Parameters

LED Type: Epistar SMD2835
LED Quantity per module: 3
Working Voltage: 110V AC
Power: 1.5W per module
Luminous Flux: 150 lm per module
Beam Angle: 160°
Driving mode: Alternating current
Dimmable: no
Dimension: 66*15*7.5 mm
Color Temperature: 6000-7000K (Cool White) 3000-3500K (warm white)
Module Length: 66 mm
Wire Length Between Modules: 125 mm
Extended Length: 19.1m
Distance between the rows of modules: 8-15cm
Recommended depth: 6-18cm
IP Rating: IP67
Working Temp.: -40~60 ℃
Wires Gauge: 24 AWG
Certification: cURus (Underwriters Laboratories) for Canada and USA
Lifetime: 50 000 Heures