Warm White to Cool White Adjustable LED Sheet 60x30cm (46W per Sheet)
Warm White to Cool White Adjustable LED Sheet 60x30cm (46W per Sheet)
Our Warm White to Cool White Adjustable LED sheet is a thin and flexible panel composed of numerous LEDs arranged in a grid pattern. This unique construction allows for uniform lighting across the entire surface, making it a preferred choice for applications where installation depth is limited. The CCT adjustable LED sheet is excellent for signage, advertising displays, and architectural lighting. The 2835 LED chips, each offering a distinct white, provide maximum brightness for each type of white.
Design flexibility is another crucial aspect of our CCT Adjustable LED sheets. These sheets can be easily cut into different sizes and shapes, allowing customization to meet specific requirements. Additionally, quick connectors are included for easy connection of your LED sheet to the controller or to connect two sheets together. If you wish to use custom-length wires, we recommend soldering the wires directly to the circuit, taking care to observe polarity.
Our CCT Adjustable LED sheets are dimmable and can produce a wide range of different whites from 2700K to 6500K in increments of approximately 300K, allowing for dynamic lighting scenarios and the creation of different luminous displays. The sheet produces only one color at a time.
Each LED sheet consumes a maximum of 46W at 24V DC, you can connect up to 2 panels to the same controller connected to a 96W transformer, as the 2 LEDs will never be lit at full intensity simultaneously. The Multi-Zone system allows you to combine multiple controllers on the same controller in perfect synchronization. We recommend the FUT035 controller for optimal performance.
Specifications:
Certification: cULus
Brand: CDNLUX
Available voltage: 24V DC
Dimensions: 60.4 x 30.2 x 0.8cm
Chip: SMD 2835
Circuit board: 2 Ounces
CRI: 90+
Available colors on White: 2700K to 6500K
Luminous flux/m at full intensity: 2700K: 2030 lm, 3000K: 2100 lm, 4000K: 2190 lm, 6500K: 2260 lm
LED Density: 1296 LEDs/Sheet
Lighting angle: 120 Degrees
Segments can be cut at: 16.77mm X 16.77mm
Adhesive: 3M Sticker
Power consumption: 46W/Sheet (see description)
Recommended transformer: 48W/Sheet must be powered by class 2 transformer
Operating temperature: 40C to -10C
Suitable for dry environment. Indoor use only.
Dimmable: CCT Adjustable Controller and Remote Control
Heat dissipation: Recommended but not necessary