24V iP20 RGB+W 5m 300 LED Strip Bundle with Bluetooth Controller
24V iP20 RGB+W 5m 300 LED Strip Bundle with Bluetooth Controller
The base kit includes 1 x 5m cUL listed RGB+W Strip (300 LED), 1x 24V power Supply and 1x RGB+White Bluetooth Controller.
Standard RGB Strips are appreciated because of their wide variety of colors but do tend to cause a slight problem when the time comes to reproducing white. Since the Standard RGB Strip uses a mix or Red, Blue and Green to makes colors, its version of the color white tends to be very blue or even purple.
The UL Listed RGB + White Strip kit from LED Montreal will output the full RGB Spectrum PLUS a true White. This chromatic prowess is achieved with special 5050 Chips that integrate 4 separate lights: Red, Green, Blue and White. Each Strip features 300 Chips over a span of 5 meters, or if you prefer, 60 LEDs per meters, giving this Strip an amazing brightness, no matter what color you select. Note that the RGB+W Strip will only produce one shade of White, either it be warm white, natural white or cool white. You will be able to select the white you prefer in the pull down menu when placing your order.
The Bluetooth LED Controller has a user friendly interface on both iOS and Android devices while offering a range of up to 30 feet depending on your tablet/mobile. When in RGB+W mode, you will be able to choose from 20 preprogrammed color changing modes, program you own color change sequence at the speed you desire or have your RGB+W LEDs reproduce a color that you like, through the lens of your camera. But that’s not all; you can also have your LEDs change colors to the beat of the music that you have downloaded in your mobile or tablet or to the ambient sound, using the microphone of your device. Have a favorite color? No problem, you can save it in the DYI memory of the application. You can also save your favorite dimming settings for the single colors!
Note that the RGB+White is offered in 24V (opposite most Strips that will run on 12V). Given that this product runs on 24V, you cannot use a 12V power supply for this Strip or use the provided power supply to try and power up a 12V product. Furthermore, you will notice that this Strip is 12mm wide, therefore wider than the Standard 10mm 5050 Strip. As well, given that this Strip offers 4 colors, it features 5 connectors unlike the Standard RGB Strip that normally features 4 connectors. This being said, solder less connectors are yet to be made available for this product. Should you require to cut and reconnect your RGB+White Strip, it can be cut every 6 LED et we suggest soldering wires directly on your Strip to advantage of our customization services by calling us to place your order. Minimum fees of 15.95$ + taxes are applicable for each extension installed.
Specifications RGB+W LED Strip:
iP20 LED Strip with 3M adhesive
For indoor use only
Certification: UL Listed for Canada and USA
5M roll, 60LED/m. 300 LED total
Can be cut: Every 6 LED (10 cm)
Strip width: 12mm
Power Consumption: 9.6W/m at 24V on Multi Zone Controller
14.4W/m at 24V on 5 in 1 RF Multi Zone Controller
Recommended Power: 12W/m at 24V on Multi Zone Controller
18W/m at 24V on 5 in 1 RF Multi Zone Controller
Lighting angle: 120 degrees
Luminus flux on white: 400 lm/m
Dimmable: Yes through application
Specifications Bluetooth Controller:
Product dimensions: 65MM*65MM*20MM
Voltage: 12-24 volts
Suitable Phone OS: Android 4.3/IOS7.0 or above
App Language: French, English, Spanish, Chinese
output current: 4A per Channel
TECHNICAL SHEET(pdf)