24V DC Single Color 5m LED Neon Flex
24V DC Single Color 5m LED Neon Flex
Create fun shapes and cool LED designs with the LED Neon Flex from LED Montreal. This super bright, plug and play LED Neon Flex is available in a 5 meter spool and comes with an included 24V 96W indoor power supply. The LED Neon Flex can be cut every 5cm using a standard pair of scissors, by following the cut guides on the side of the tube.
The LED Neon Flex is available in warm white,cool white, red, green and blue. It runs at 24V and consumes 15W per meter. The LED Neon Flex is not self adhesive and can be held in place with the Neon Flex Aluminum mounting clips. Measuring only 8mm wide by 16mm high.
Want to give your LED Neon Flex display that special punch? Use our 11 key Dimmer and get 10 different flashing modes, variable speed within each mode plus dimming and on/off functions!
We suggest our aluminum profile for Neon Flex if you want to install straight lines of Neon Flex.
Specifications:
Certification: cULus E498952
Brand: CDNLUX
Voltage available: 24VDC
Chip: Epistar 3528 SMD
5M roll, 120LED/m. 600 LED total
Lighting angle: 120 degrees
Neon Flex dimension: 8mm x 16mm
Power consumption: 15W / meter
Recommended transformer: 18.75W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -10C
iP rating: iP65+
Suitable for dry, damp and wet environment
Dimmable: Yes, through the remote / wall panel remote
Heat Dissipation: Not necessary, unless used in a commercial environment