Easter holiday. Friday march 29th, the store will be closed. Monday April 1st, the store will be open. 

Wall Mounted RF Multi Zone Panel and-or Controller for CCT Adjustable LED Strip

B2KIT
$60.00
In stock
B2KIT
Delivery
Shipping time and rates:
Payment options
Our advantages

Wall Mounted RF Multi Zone Panel and-or Controller for Warm White Cool White Adjustable LED Strip

It has finally arrived! LED Montreal keeps innovating and has just launched the Wall Mounted RF Multi Zone Panel Remote Control for Warm White Cool White Adjustable LED Strips to use with the Multi Zone Controller.

The Wall Mounted RF Multi Zone Panel and-or Controller for Warm White Cool White Adjustable LED Strip has fashionable tempered glass, and its touch screen is very stable and has a high speed wireless transmitting rate. The newest addition to the Multi Zone system is more than elegant with its newly developed technology and stylish look.  It is wireless and needs no wiring. You can either install it on a wall or surface of your choice with use of the included double sided adhesive tape, or with use of screws, or simply use it as a mobile remote control.

This Controller will work with both 12V and 24V Strips and Power Supplies.

Controller :
Dimensions : 85mm x 45mm x 22.5mm
Working Voltage : 12- 24V DC
Maximum output : 6A/ Channel  10A Total
Control Range : up to 30m

The Wall Mounted RF Multi Zone Panel Remote Control for Warm White Cool White Adjustable LED Strips operates on 2.4 GHz frequency, giving it with a range of up to 30 meters and features numerous functions for each zone you want to control. Control all Zones at once or each Zone individually. Set a delay and turn off your Strips automatically after 60 seconds at the touch of a button. Press the master ON button to turn on all linked lights or press for 5 seconds to turn on the indicating sound. Press the master OFF to turn off all linked lights, or press for 5 seconds and turn off the indicating sound. Use the Dimming Slider to change the brightness from 1-100%.

This is it! This is the newest technology to control your whole lighting universe. With the RF Multi Zone Remote and-or Controller for Warm White Cool White Adjustable LED Strips from LED Montreal, you can operate every Warm White Cool White Adjustable RF LED Strip in your house. You already have a setup at home but find it quite complex and uneasy to handle? There’s your chance to improve and make it a multi zone system. All you have to do is change the controllers for your LED strips and you can now control them all with the Multi Zone Remote. On the flipside, If you’re a newbie to all of this, you can start shaping your dream house with a 24V IP20 3014 Warm White Cool White Adjustable LED Strip Kit which includes the remote, controller and a 5 meter strip. Add as many controllers as you want and assign them all to one of the 4 available zones.

The 4 Zone set up is just awesome and so convenient!
A few examples:

  • Control the lighting in your kitchen on Zone 1, your bedroom on Zone 2, your living room on Zone 3 and your recreation room on Zone 4.
  • Divide a room in two zones and control one side with Zone 1 and the other side using Zone 2.
  • Alternatively, you could set up the whole house on a single zone and have all your strips turn on and off in sync... that’s how powerful and versatile this kit is!
  • You could also cut a LED strip in 2, plug in a different controller for each part and control the 2 pieces separately on 2 different zones. Note that if you do so, you’ll need an extra Quick DC Connector and power supply.

Adding on to a Zone is easy!
For a new product or a product that has never been linked before:

  1. Disconnect the power supply from the controller to switch off the light(s) you want to program.
  2. Turn the light back on and within 3 seconds; press the ON (│) button of the zone you want to assign (1 to 4) on the remote control.
  3. The light will slowly flash 3 times to indicate that it was successfully linked.

ou can repeat this procedure for each light product you want to add to your Zone.

Change a light from one zone to another.
If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.

  1. Identify which zone the light is currently assigned to.
  2. Disconnect the power supply to turn off the light(s) you want to program. 
  3. Power the light back on and within 3 seconds; press the ON button of the previously assigned zone 5 times quickly. 
  4. You can then proceed and program your light according to the add-on procedure outlined above.
Wall Mounted Remote Specifications:
- L86mm x W86mm x H17mm
- Control distance: 30m
- Input Voltage 3V (requires 2 AAA batteries)
- Working temperature: -20-60°C
- Color: White casing
- Mount type: Screw in or double sided adhesive tape (included)

For extensive instructions on how to install your Multi-Zone setup, VISIT THIS PAGE.

 
As always, our team of experts is available should you have any question or require assistance putting your project together.

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project