12V 5m iP20 2835 White High Output LED Strip - 128 LEDs/m (Strip Only)

12V 5m iP20 2835 White High Output LED Strip - 128 LEDs/m (Strip Only)

Here is the High Intensity LED Strip that you were waiting for! The 2835 LED Strip offers 128 LED lights per meter for a total of 640 lights per  5m length. It has a brightness of 3600lm per meter and a beam angle of 120 degrees. It is versatile and can be cut at every 4 LED lights (approximately 3 cm). To fit with your existing decor,  It is offered in four shades of white: Amber (1800K), Warm White (3000k) and Cool White (5000k).

The 2835 LED Strip with 128 LED per meter requires a power supply of 30w per meter and can be dimmed with a dimmable power supply or with a compatible low voltage dimmer. Consult our page about power supplies to know more about the required power for your LED strip.

This incredible power generates a brightness like no others which allows a continuous LED lightning with no hot spots when the strip is installed on one of our aluminium profiles specially made for this type of effect. Imagine your guests’ reaction when they will see this thin lightning bar that has a lighting similar to a neon!

Like every high intensity strip, the 2835 LED Strip must have adequate heat dissipation to ensure its performance and durability. Trying to install this LED Strip on an improper surface will permanently damage it. You should install the 2835 LED Strip in a compatible aluminium profile.

This iP20 LED Strip does not offer any water protection. Moreover, no connectors are available for this type of strip. Because of its high intensity, you have to install 18 gauge  wire if you want to make connections on LED strips.

Specifications:

Brand: CDNLUX
Model: MTL-FP10AEHDJ-128AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952
Product code updated on 05/16, previous code: 2835RPP12V

Chip: Epistar 2835 High Output SMD
Chip density: 128 LEDs per meter
Can be cut: All 4 LEDs (30mm)
Length: 5 meters
Width: 10mm
Height: 2mm

Voltage: 12V DC
Power consumption: 24W/m
Recommended power supply: 30W/m, Class 2 power supply required
Recommended power supply for 2m: 60W, Class 2 power supply required
Typical luminous flux: 3200 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 1800K / 3000K / 4000K / 5000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel