12V 5m Weatherproof iP67 Super Bright RGB 5050 LED Strip - 30 LEDs/m (Strip Only)

12V 5m Weatherproof iP67 Super Bright RGB 5050 LED Strip - 30 LEDs/m (Strip Only)

The technical stuff: RGB Stands for Red-Green-Blue. 5050 RGB Chips give a 120-degree light beam and feature each of these 3 colors of LED lights within each chip: This allows to create up to two million different colors by mixing the red, green and blue at different levels. The amount of colors that can be achieved will depend on the RGB controller that you use. Note that the RGB Chip does not create a true white. Should you want to use your Strip to both enhance your décor and get an ambient white light, we strongly suggest using our RGBW Strip (Only available in 24V) that includes a white LED diode within the 5050 chips. 

RGB LED Strips have a 4-wire connection, meaning that they can only be operated through an RGB controller. The controller will allow you to dim your strip and change colors manually or through automated color change patterns. The strip cannot be dimmed through a standard wall dimmer. Forecast a power supply at 12V DC of 9W (0.75A) per meter for your installation. As stated earlier, this strip comes in a 5m spool. You will find all the specs of the RGB LED Strip at the bottom of this page.

You can customize your LED Lighting set up as this Strip can be cut every 3 LEDS. The RGB LED Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend to solder 4 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss.

Your RGB LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces.

The adhesive on the back of the LED strip is perfect for any permanent installation, for indoor or outdoor usage. Additional option when looking for a sharp and subtle way to hold your ip67 LED strips, the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution. 

Dimensions: 5 meter long, 1.2cm wide and 0.5cm thick 

Specifications:

Brand: CDNLUX
Model: MTL-FP10AGHW-30ARGB
Certification: cULus E498952
Voltage available: 12VDC
Chip: Epistar 5050 RGB SMD
5M roll, 30LED/m. 150 LED total
Lighting angle: 120 degrees
Can be cut: All 3 LEDs (10cm)
Strip Width: iP67+: ≈12mm
3M Self-adhesive
Power consumption: 7.2W / meter
Recommended transformer: 9W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -20C
Suitable for dry, damp and wet environment
Dimmable: Yes, through the remote/ wall panel
Heat Dissipation: Not necessary, unless used in a commercial environment