24V 5m iP20 12mm COB LED strip - RGB+W

24V 5m iP20 12mm COB LED strip - RGB+W

Get a thin linear lighting effect (12mm wide and 2mm thick) that is also elegant and bright with LED Montreal's RGB+W COB LED Strip. UL Certified for use in Canada and the United States, this RGB+W (Multicolor + White) COB LED Strip can be cut every 83.3mm. This Strip offers a super high density of COB chips that will give you a continuous, neon like effect when used with our LUX740 channel and its Premium diffuser.

This professional-grade COB product has a 3OZ copper circuit board that allows for better lighting consistency and superior heat dissipation. The COB LED Strip consumes 14.4W per meter at 24V DC. The 5m long Strip is equipped with a 150mm cable at each end.

The RGBW COB LED Strip is intended for indoor use only in dry locations. To maximize the lifespan and the COB LED light, we recommend that you affix it to an aluminum surface to properly dissipate its heat. Installing this product on a wood or gypsum surface may affect its performance and lifetime of the product.  

To create an unparalleled atmosphere in the evening, you will be happy to learn that the COB LED Strip is fully dimmable through an RGB+W controller.

We want your project to be a success all along the line, which is why we advise you to carefully read the installation guide for Low Voltage LED Strips prior to starting your project. 

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA

Chip: COB
Circuit board: 3 Ounces
Can be cut: Every 83.3mm
Length: 5 meters
Width: 12mm
Height: 2mm

Voltage: 24V DC
Power consumption: 14.4W/m
Recommended power supply: 18W/m, Class 2 power supply required
Recommended power supply for 5m: 90W, Class 2 power supply required
Typical luminous flux: 350 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: RGB + White (3000K or 4000K)
CRI on white: 90+
Lighting angle: 98.4°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: 5 wires (15cm) on one end and 5 wires (15cm) on the other end
Dimmable: Yes, with a low voltage controller/remote combo
Heat dissipation: Recommended to be installed on a heat dissipating surface or in appropriate aluminum channel