Due to the holiday volume and weather conditions all courier companies are currently experiencing delays.
Holiday vacations, closed: From 12/20/2204 to 01/05/2025. Back on 01/06/2025.
Orders received during this period will begin shipping/be available for pickup starting on 01/06/2025.
Categories

24V 5m iP67 10mm COB LED Strip for Sauna - White

COB67-3000
$144.95
In stock
COB67-3000
Payment options
Our advantages

24V 5m iP67 10mm COB LED Strip for Sauna - White

Get a thin linear lighting effect (10mm wide and 5mm thick) that is also elegant and bright with LED Montreal's Continuous Lighting (Dot less) COB LED Strip. UL Certified for use in Canada and the United States, this COB LED Strip is available in four shades of white: 2700K (Warm White), 3000K (Warm White), 3500K (Soft White) and 4000K (Natural White). You can cut your thin COB Strip every 50mm and solder extension wires on the connection pads.  

Please note that our sauna COB strip light is currently available exclusively in white. We do not offer RGB or RGBW variants, as these are not suitable for high-temperature environments.

The 10mm iP67 COB LED Strip can withstand ambient temperatures up to 95 degrees Celsius and does not require heat dissipation. These unique characteristics make it the ideal lighting element for dry or wet saunas. We therefore suggest that you illuminate the underside of your seats with this LED COB Strip. It is not advisable to install it above 150 cm in height in high temperature places. Not being self-adhesive, the package includes 20 silicone clips and proper screws to facilitate installation. You will also find three silicone finishing caps, if you want to cut and waterproof the end of your LED Strip.

UPDATE: The 2700K, 3000K, and 3500K products are now equipped with a heat-resistant adhesive that can withstand temperatures up to 150°C, allowing for pre-installation before adding the support clips. While the adhesive is strong, we always recommend using support clips during the installation of the LED strip.

This professional-grade COB product has a 3OZ copper circuit board that allows for better lighting consistency and superior heat dissipation. Its high color rendering index (CRI) of more than 90 makes it a product of choice for the demanding customer. The COB LED Strip consumes 10W per meter at 24V DC. The 5m long Strip is equipped with a 1m cable at each end. Note that this listing is for the LED Strip only. The power supply is sold separately. Choose the correct power supply depending on total length required and dimming needs. 
 
To create an unparalleled atmosphere in the evening, you will be happy to learn that the COB LED Strip is fully dimmable using a wireless system or even using a standard dimmer thanks to our dimmable 24V power supplies.

We have prepared for you a quick guide on what power supply to use, depending on the length of Strip that you plan on using. Note that UL certification and the Canadian Electrical Code limits the power supply at 96W max. The power supplies use free air cooling and should never be installed inside the sauna.

Non Dimmable drivers

1 to 3.5 meters : 24V2AETLPSU
3.5 to 5.5 meters : 24V3AETLPSU
5.6 to 7.6 meters : 24V4AETLPSU

Note that if you wish to make your kit dimmable and do not have a dimmer switch available, you can use our K1KIT to control the strip’s intensity with a non dimmable driver.

If you do have a 120V dedicated dimmer switch available, you can use a dimmable driver. Once again, make sure that the driver sits in a dry and cool environment.

Dimmable Drivers

1 to 3.5 meters : 24DIMP48
3.5 to 5 meters : 24DIMP60
up to 7.6 meters : 24DIMP96

We want your project to be a success all along the line, which is why we advise you to carefully read the installation guide for Low Voltage LED Strips prior to starting your project.  

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA

Chip: COB
Circuit board: 3 Ounces
Can be cut: Every 50mm
Length: 5 meters
Width: 10mm
Height: 5mm

Voltage: 24V DC
Power consumption: 10W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 5m: 60W, Class 2 power supply required
Typical luminous flux(per meter): 2700K: 840 lm, 3500K: 920 lm, 4000K: 940 lm
Available colors: 2700K, 3000K, 3500K, 4000K
CRI: 90+
Lighting angle: 98.4°
Lifespan: 50 000 Hours

NonAdhesive: (20 installation clips included)
iP rating: iP67
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 95C to -20C
Connections included: 2 wires (1 meter) on one end and 2 wires (1 meter) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Included

LED Strip Specifications
Brand
CDNLUX
Model
COB67
Certification
cULus for Canada and USA
Chip
COB
Circuit board
3 Ounces
Can be cut
Every 50mm
Length
5 meters
Width
10mm
Height
5mm
Voltage
24V DC
Power consumption
10W/m
Recommended power supply
12W/m
Typical luminous flux
940 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Color-Temperature
3000K Warm White
CRI (Color Rendering Index)
90+
Lighting angle
98.4°
Lifespan
50 000+ Hours
Self-adhesive
3M
Items that may interest you
  • Most Popular
  • Bestsellers
Quick shipping all over Canada and the US

In store pickup available

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project