24V 8m iP20 3528 White LED Strip - 120 LEDs/m (Strip Only)
24V 8m iP20 3528 White LED Strip - 120 LEDs/m (Strip Only)
LED Montreal offers a complete range of CDNLUX Certified Low Voltage LED Strips intended for industry professionals such as designers, architect and cabinetmakers. Our Certified 24V LED Strips will perfectly answer your clientele’s certification needs, even if their project is located in the USA.
This 3528 LED Strip offers 120 LEDs per meter over a 8m Strip for a total of 960 LED per Strip, an brightness of 800 lumens per meter and a 120 degree lighting angle. Versatile, it can be cut at every 6 LED (approx 5cm) to perfectly fit your project. To better suite your existing decor, we have made the Certified 3528 Strip available in various shades of white: Warm White (2700k), Warm White (3000k), Soft White (3500k) Natural White (4000k), Daylight (5000k).
The 3528 LED Strip with 120 LED per meter requires 9.6W of power per meter (we recommend using 12W to ensure a proper load on your LED driver) and can be dimmed with one of our compatible dimmer. The Certified 3528 LED Strip emits a continuous flow of Light (without the standard dot effect of LEDs) when you combine it with our specially designed LED Aluminum profile. Imagine how amazed your guests will be when they see a thin light bar that looks exactly like a neon. This strip is ideal for under counter lighting as it produces a good luminous flux without being overly bright.
Looking for more lumens out of your LED Strip? Get up to 1000 lumens per meter with the 3014 LED Strip
It is highly recommended to use this LED Strip with a proper heat sink. Most commonly used heat sink are aluminum profiles as they also protect your uncoated strip from dust while ensuring that your LED Strip perform at its best for the longest time.
Looking for a power supply for your 24V Strip? Visit our 24V power supply section here. Consult our page about power supplies to know more about the required power for your LED strip.
Rated at iP20, this LED Strip offers no protection from water and dust. Furthermore, there are no solderless connectors available for the Certified 3528 LED Strip. Given its high intensity, we recommend using 20 AWG wire should you need to make connections between parts of LED Strips.
Specifications:
Brand: CDNLUX
Model: MTL-FP8AEIDJ-120AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952
Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 8 meters
Width: 8mm
Height: 2mm
Voltage: 24V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 8m: 96W, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K /3500K/ 4000K / 5000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours
Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel
Spec Sheet (PDF)